Inconel 601 Manufacturers,stockiest and Suppliers.

Alloy 601 Nickel 601; Pyromet 601; Nicrofer 601; Nickelvac 601; Ferrochronin 601,UNS N06601,AMS 5715, AMS 5870; ASTM B166, ASTM B167, ASTM B168

Inconel 601 alloy sheets,plates,roundbars,Pipes,tubes,wires,weldingrods,etc.

Inconel® Alloy 601™ is a solid solution nickel chromium heat resisting alloy which gives outstanding performance at temperatures up to about 1200°C.

Inconel 601 also has good aqueous corrosion resistance due to the high nickel content in combination with chromium. Strength and toughness are good, and are retained during extended service at high temperature.

Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and retains its ductility after long service exposure.

It has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601’s properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation.However, alloy 601 is not suggested for use in strongly reducing, sulfur bearing environments.

Inconel 601 Roundbars : ASTM SB166 Alloy 601 Roundbars has good high temperature strength, and retains its ductility after long service exposure. 

Inconel 601 Plate, Sheet and Strip : Inconel Alloy 601 sheets and plates are additionally being offered in modified sizes and shapes to our customers.

Inconel 601Wire : Inconel alloy 600 wires is a non-magnetic alloy that is used in the diverse corrosion resistant applications for offering exceptional resistance to chloride based stress corrosion cracking. 

Inconel 601 weldingrods : inconel Alloy 601 Weldingrods is a nickel-iron-chromium alloy by means of having additions of copper and molybdenum.ASTM B166 / ASME SB166
Inconel 601 Pipe and Tube : ASTM B 167; ASME SB 167, ASTM B 163; ASME SB 163, ASTM B 516; ASME SB 516, ASTM B 517; ASME SB 517, ASTM B 751; ASME SB 751.

characteristics of Inconel 601

Tremendous & Outstanding oxidation resistance to 2199° F

Good in Resists spalling even under severe thermal cycling conditions

Very Very Highly resistant to carburization

Constant & Good creep rupture strength

Highly Metallurgical stability

Copper brazing, annealing and sintering muffles and retorts
Radiant tubes
Strand annealing tubes
Steam superheater tube supports
Rotary kilns and calciners
Thermocouple protection tubes

Short-Time Elevated Temperature Tensile Properties

Typical Creep – Rupture Properties

Material Keywords: Inconel 601, ASTM B 166/ASME SB 166,DIN 17752,DIN 17753,DIN 17754,EN10095,ISO 9723,ISO 9724,ISO 9725, ASTM B 168/ ASME SB 168,DIN 17750,EN10095,ISO 6208, ASTM B 167/ASME SB 167,ASTM B 751/ASME SB 751ASTM B 775/ASME SB 775,ASTM B 829/ASME SB 829DIN 17751,ISO 6207

Other relevant :

we also stockiest and suppliers of inconel 660 alloy which is high temprature resistance alloys where

we supply in the form of roundbars,sheets,plates,coils,wires,weldingrods,pipes,tubes,flanges,fittings and fastners.

We Welcome your inquiries.

For quotations and enquiries, please write to us : [email protected] 
Inconel® 600 is a Registered Trademark of Special Metals Corporation and Its subsidiaries.